Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings
Products available in:
This week's most popular products:
Brakes for Marker Alpinist binding. If you're prepared to sacrifice some weight saving, the Alpinist binding has specific brakes that add extra safety. Choice of two sizes 90mm or 105mm; sold in pairs. [Full Details]
The Attack 11 GW is the obvious option for skiers wanting great performance from a lightweight binding. It uses the same wide platform as its bigger brother, meaning impressive energy transmission. The toe piece is identical too, with a horizontal toe release spring ensuring a compact size and low swing weight. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 3-11Brake Width: 95Weight: 955Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Atomic Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 880Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/gold [Full Details]
Bindings - Compare Prices
The carbon-reinforced toe pad ensures optimal edge pressure distribution while the aluminium frame, heels, and essential parts kick the performance and durability to the next level. It is the highest performing most user-friendly and highly reliable lightweight tech binding you could ask for. Designed with maximum precision for optimal uphill performance and astonishing downhill reliability. engineered to the highest performance standards it is equipped with more technology than any binding on the market. eeS, CAM release system, elastic Response System, Magneto heel flaps, Snow pack proof, ICe system and more. At 305 grams per piece, it is a true engineering masterpiece. The adjustable vertical and lateral elasticity is smooth and very simple to adjust, while forward pressure or elastic response system assures the natural flex of the ski in the heel part resulting in maximum energy absorption. With 25 mm of length adjustment and a DIN range from 5-12, it covers all types of boots and users. From extreme conditions to first uphill ascends it is the most reliable and easy step in tech binding ever.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the R10 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key Features*Note that the stomp pad is only compatible with skis with waist width greater than or equal to 95mm. The R10 can be mounted without the stomp pad on skis narrower than 95mm waist. Brake sizes 97mm is compatible with 100RP ski models and the 108mm is compatible with 112 RP models.SKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 4-10Brake Width: 86, 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The carbon-reinforced toe pad ensures optimal edge pressure distribution while the aluminium frame, heels, and essential parts kick the performance and durability to the next level. It is the highest performing most user-friendly and highly reliable lightweight tech binding you could ask for. Designed with maximum precision for optimal uphill performance and astonishing downhill reliability. engineered to the highest performance standards it is equipped with more technology than any binding on the market. eeS, CAM release system, elastic Response System, Magneto heel flaps, Snow pack proof, ICe system and more. At 305 grams per piece, it is a true engineering masterpiece. The adjustable vertical and lateral elasticity is smooth and very simple to adjust, while forward pressure or elastic response system assures the natural flex of the ski in the heel part resulting in maximum energy absorption. With 25 mm of length adjustment and a DIN range from 5-12, it covers all types of boots and users. From extreme conditions to first uphill ascends it is the most reliable and easy step in tech binding ever.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the R10 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key Features*Note that the stomp pad is only compatible with skis with waist width greater than or equal to 95mm. The R10 can be mounted without the stomp pad on skis narrower than 95mm waist. Brake sizes 97mm is compatible with 100RP ski models and the 108mm is compatible with 112 RP models.SKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 4-10Brake Width: 86, 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Copyright Interhike. All rights reserved.