Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings
Products available in:
This week's most popular products:
Brakes for Marker Alpinist binding. If you're prepared to sacrifice some weight saving, the Alpinist binding has specific brakes that add extra safety. Choice of two sizes 90mm or 105mm; sold in pairs. [Full Details]
The Attack 11 GW is the obvious option for skiers wanting great performance from a lightweight binding. It uses the same wide platform as its bigger brother, meaning impressive energy transmission. The toe piece is identical too, with a horizontal toe release spring ensuring a compact size and low swing weight. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 3-11Brake Width: 95Weight: 955Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
Bindings - Compare Prices
The Carbon Raider 12 is one of the lightest touring bindings with a 12 DIN and brakes, on the market.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the C Raider 12 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 5-12Brake Width: 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Carbon Raider 12 is one of the lightest touring bindings with a 12 DIN and brakes, on the market.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the C Raider 12 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 5-12Brake Width: 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Copyright Interhike. All rights reserved.