Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£85
From Ellis Brigham
Salomon's S/Race 60 M takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm; 4 aluminium clips hold the foot neatly in place.Ability LevelBoots7OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1550Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370 - £560
Using many features of the top-end models in the range, the Hawx Prime XTD 100 HT is an excellent introduction in to the world of BC ski boots providing performance, comfort and excellent value. Prolite construction uses different thicknesses of shell wall to balance lightweight with power and control. The Free/Lock hike and ski system provides 54deg of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the 3D Silver Touring liner takes a mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles at the toes (not at the heel) so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver with Touring Flex Zone, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. A special construction in the rear of the liner allows it to flex backwards for a more comfortable range of motion when the walk mode is being used.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: Toe onlyHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1962 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Head's edge Lyt 90 W is packed with useful innovation that boosts comfort and performance as well as reducing weight, and for 22/23 it now uses GripWalk soles to make getting around resort more comfortable and safer. The Smart Frame construction increases rebound and works with the Hi-Top Tech design to improve control. Weight drops by 20% whilst power transfer increases compared to previous models. The Form Fit plastic of the shell is custom moulded during the fitting to more closely match the skier's feet; the Perfect Fit 3D liner is pre-shaped for comfort and heat moulded to further customise the fit. A women's specific adjustable cuff adds extra personalisation.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.LinerPerfect Fit HD W, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots.Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1638 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 90 W is packed with useful innovation that boosts comfort and performance as well as reducing weight, and for 22/23 it now uses GripWalk soles to make getting around resort more comfortable and safer. The Smart Frame construction increases rebound and works with the Hi-Top Tech design to improve control. Weight drops by 20% whilst power transfer increases compared to previous models. The Form Fit plastic of the shell is custom moulded during the fitting to more closely match the skier's feet; the Perfect Fit 3D liner is pre-shaped for comfort and heat moulded to further customise the fit. A women's specific adjustable cuff adds extra personalisation.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.LinerPerfect Fit HD W, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots.Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1638 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With its higher volume shell and easy customisation, the Sportmachine 3 95 W is a great option for intermediate female skiers needing a wider fit. The Infrared technology used on the shell means it can be heated in specific areas to provide extra shape where needed and the Adaptive Calf Profile can add a generous 14mm of cuff space to better suit the skier's anatomy. A Tri-Fit construction shell stiffens the parts of the boot responsible for power transfer and control and uses more fit-friendly softer plastics to encase the foot for better comfort. Over the instep is an even softer plastic to help the boot open and let the foot slide in and out effortlessly. A women's specific, pre-shaped 3D Performance Fit PrimaLoft liner provides synergy between the foot and shell and can be heat moulded to provide the right balance of support and comfort. This well-designed wide fitting option means that skiers needing a more generous fit no longer have to sacrifice on performance to get the comfort they desire.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£325
From Ellis Brigham
With its higher volume shell and easy customisation, the Sportmachine 3 95 W is a great option for intermediate female skiers needing a wider fit. The Infrared technology used on the shell means it can be heated in specific areas to provide extra shape where needed and the Adaptive Calf Profile can add a generous 14mm of cuff space to better suit the skier's anatomy. A Tri-Fit construction shell stiffens the parts of the boot responsible for power transfer and control and uses more fit-friendly softer plastics to encase the foot for better comfort. Over the instep is an even softer plastic to help the boot open and let the foot slide in and out effortlessly. A women's specific, pre-shaped 3D Performance Fit PrimaLoft liner provides synergy between the foot and shell and can be heat moulded to provide the right balance of support and comfort. This well-designed wide fitting option means that skiers needing a more generous fit no longer have to sacrifice on performance to get the comfort they desire.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1650 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1650 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The S/PRO 100 is one of the bestselling intermediate and advanced boots of the last decade thanks to a perfect mix of comfort and performance. Custom Shell HD is a fast and effective way of custom moulding a shell to improve the fit; the pre-formed seamless liner is warm, light and comfortable, and ready to be heat moulded during fitting. In fact, the whole boot is light due to the Coreframe construction that places a stiff frame close to the foot so there’s no loss of power.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.ShellPU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity and good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Performance, mouldable. New anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1800 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The K2 FL3X Method Pro W is a super comfy option for ladies wanting a boot that is easy to use but still delivers performance on the mountain and in the park. It, of course, uses the FL3X 3-piece design with a ribbed tongue for the smoothest flex and the best shock absorption whatever the conditions: hard, soft or lumpy. It's a flex 4 tongue, equivalent to a 70 flex from other brands, so it's nice and soft, easy to flex and perfect for getting used to riding new terrain and building confidence in the park. The design of the shell and the Infinite Pivot also means that unlike 2-piece boots it never bottoms-out or blocks the flex, so there's less chance of shin bang and it helps increase control. It's a higher volume fit, suiting skiers wanting more space and can be heat moulded to shape and form even better to the skier's feet. The Intuition Wrap liner is easy to slip in and out of and is fully customisable to take the best possible shape for maximum comfort, as well as being one of the lightest and warmest liners on the market. This high level of customisation helps ensure great foothold, which is improved further by the 450 Heel Lock of the middle buckle that securely positions the heel in the rear of the boot.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The Method shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2's lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer. Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1800 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Copyright Interhike. All rights reserved.