Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£85
From Ellis Brigham
Salomon's S/Race 60 M takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm; 4 aluminium clips hold the foot neatly in place.Ability LevelBoots7OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1550Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370 - £560
Using many features of the top-end models in the range, the Hawx Prime XTD 100 HT is an excellent introduction in to the world of BC ski boots providing performance, comfort and excellent value. Prolite construction uses different thicknesses of shell wall to balance lightweight with power and control. The Free/Lock hike and ski system provides 54deg of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the 3D Silver Touring liner takes a mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles at the toes (not at the heel) so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver with Touring Flex Zone, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. A special construction in the rear of the liner allows it to flex backwards for a more comfortable range of motion when the walk mode is being used.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: Toe onlyHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1962 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£410
From Ellis Brigham
Salomon’s all new S/PRO Alpha 100 W ticks every box for advanced and expert women skiers looking for a slimmer fitting boot. The fit can be totally personalised thanks to a Custom Shell HD moulding process and heat fitted Custom Fit 3D liner, producing the best possible match to the skier’s foot and maximum comfort. In addition, the clips are easy to move to find the perfect position and the cuff can be adjusted for width and height. Performance is thanks to the race inspired build and thin shell walls that sit close to the foot for increased control. Best of all is the re-thinking of the buckle placement on the foot, by moving the instep clip back and increasing the space between the buckles, the heel hold is improved, entry and exit are easier, and there is less pressure on the top of the foot.Ability LevelBoots12OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 4D Sport with thermoformable Talyn and Custom Tongue, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 4D Sport liner is heat mouldable for extra comfort and precision. Talyn provides a comfortable, initial fit and can be spot heated to improve the shape and precision if required. The customisable Tongue is easy to adapt to unique shapes on the shin and over the instep.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£410
From Ellis Brigham
Salomon’s all new S/PRO Alpha 100 W ticks every box for advanced and expert women skiers looking for a slimmer fitting boot. The fit can be totally personalised thanks to a Custom Shell HD moulding process and heat fitted Custom Fit 3D liner, producing the best possible match to the skier’s foot and maximum comfort. In addition, the clips are easy to move to find the perfect position and the cuff can be adjusted for width and height. Performance is thanks to the race inspired build and thin shell walls that sit close to the foot for increased control. Best of all is the re-thinking of the buckle placement on the foot, by moving the instep clip back and increasing the space between the buckles, the heel hold is improved, entry and exit are easier, and there is less pressure on the top of the foot.Ability LevelBoots12OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 4D Sport with thermoformable Talyn and Custom Tongue, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 4D Sport liner is heat mouldable for extra comfort and precision. Talyn provides a comfortable, initial fit and can be spot heated to improve the shape and precision if required. The customisable Tongue is easy to adapt to unique shapes on the shin and over the instep.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica have brought the rear entry boot back with a bang, the comfy fitting HF 85 W totally takes the hassle out of owning ski boots. With only one buckle for opening and closure, the Back Buckle Closure System uses a hands-free design that swiftly opens the rear of the boot so you'll be the first one ready to ski in the morning and when you're done for the day, you'll be back out of your boots in no time at all. A simple yet effective ratchet strap over the instep provides a closer fit and the HF 3D Cork Fit W PrimaLoft liner uses some tricks borrowed from top-end liners to make the foot comfortable yet supported. These include a pre-formed ankle area which is lined with cork to provide foot hold and can be heat moulded for the best fit, there's also Primaloft insulation for warmer, drier feet. Further customisation is available with Nordica's signature Infrared technology which means boots can be easily heated in specific areas to add shape where needed. This is the perfect blend of tried and trusted design with new technology, bringing together comfort, control and ease of use.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.SpecificationCategory: AlpineFlex: 85Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
With a flex of 115 this Speedmachine 3 sits at the top of our women's boot range. There's a lot of innovation packed into this model such as the 3Force construction, a lightweight honeycomb design that provides lateral stiffness and linear power to the ski for ultimate control and feedback. This is effectively blended with softer plastics to wrap the foot and deliver comfort with ease of entry, something that other performance boots can compromise on. A pre-shaped 3D Cork Fit W PrimaLoft liner makes sure the boot feels, and fits, great straight out of the box. The liner can also be moulded to maximise comfort, while the cork adds rear foot hold and the PrimaLoft insulation ensures feet stay warm. Infrared technology on the shell makes sure the boot can be customised quickly and effectively in-store to add extra shape where needed. The ultimate choice for advanced and expert skiers wanting a medium width boot.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 115Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
With a flex of 115 this Speedmachine 3 sits at the top of our women's boot range. There's a lot of innovation packed into this model such as the 3Force construction, a lightweight honeycomb design that provides lateral stiffness and linear power to the ski for ultimate control and feedback. This is effectively blended with softer plastics to wrap the foot and deliver comfort with ease of entry, something that other performance boots can compromise on. A pre-shaped 3D Cork Fit W PrimaLoft liner makes sure the boot feels, and fits, great straight out of the box. The liner can also be moulded to maximise comfort, while the cork adds rear foot hold and the PrimaLoft insulation ensures feet stay warm. Infrared technology on the shell makes sure the boot can be customised quickly and effectively in-store to add extra shape where needed. The ultimate choice for advanced and expert skiers wanting a medium width boot.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 115Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
K2’s Anthem BOA 95 is 23/24 season model that is released early, and exclusively, through ellis Brigham in the UK. This a boot that will appeal to advanced and intermediate skiers who want the best in terms of comfort, convenience, and performance. It ditches the clips over the foot and instead uses a BOA system. This BOA Fit System provides a performance fit engineered to enhance feel and responsiveness while reducing pressure points by incrementally modulating the Alpine boot closure with precise micro-adjustments. Just push in to engage, turn to tighten or loosen, and pull up for fast release. This connected fit uniformly wraps the foot and minimizes downward pressure, increasing heel lock-down for improved power and edge-to-edge control. Not only is the fit impressive, but so is the balance of lightness and performance. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. Comfort isn’t just coming from the BOA, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelBoots10OverviewFitAverage fit around the rear foot and over the instep, The MultiFit Last helps to reduce volume in the midfoot to forefoot area, round toe shape.ShellTPU shell, customisable. Using a TPU shell means they can be easily customised and has the power to drive skis, but it remains light and not over stiff with excellent rebound.LinerLuxFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesBOA Fit SystemThe BOA® Fit System delivers dialed in performance and a micro-adjustable precision fit. It consists of three integral parts: a micro-adjustable dial, lightweight yet extremely strong laces and low-friction lace guides, which are applied in uniquely designed configurations to improve the fit and performance of the boot.BOA DialThe dial provides micro-adjustable, precision fit and quick release, with quality and durability guaranteed. The BOA dial platform features a breakaway design engineered to eject the dial cartridge upon severe impact without damaging the system, allowing skiers to pop the dial back into the bayonet mid-mountain. In the unlikely event that the system is broken, it can be easily repaired and replaced.BOA LaceThe lace is built to withstand skiing the toughest terrain, season after season. Made of stainless steel, SS3 is BOA’s strongest, most durable lace, boasting a tensile strength of more than 254kg.BOA GuidesHeavy-duty guides to ensure a smooth and precise fit, with low friction tightening and loosening.MultiFit LastThe MultiFit Last was developed in conjunction with the BOA® Fit System to accommodate a variety of foot shapes ranging from 97mm to 100mm eliminating the need for multiple last options for lower and medium volume feet.Modular Honeycomb Boot Board with Hard & Soft InsertsStay warmer, longer. Traps heat and insulates like a down jacket. Retains heat 15% better than a traditional boot board, Harshmellow™ Inserts provide soft or rigid inserts in the heel allowing the rider to customise the feel and responsiveness depending on personal preference; softer insert for extra damping or a more rigid insert for improved power transfer.General InformationCategory: AlpineFlex: 95Last Width: 97-100 + 4mmCustom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; BOA Closure On ClogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1580 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The MTN explore W is the ultimate choice for female tourers who want lightness and function for uphill comfort, along with performance for even the hardest descents. Oversized Pivots, Carbon Spine Technology and Sensifit shell give the boot power and control while the Surelock walk mechanism with 63o of movement and lightweight Grilamid construction helps on tiring ascents. A women's specific Ultralight full thermo liner is custom moulded for the best comfort and foot hold, as well as toasty feet. [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320 - £470
This latest version of possibly the best-fitting, wider-volume men's boot has a new shell design for increased power and updated liners for improved comfort. The Magna 130 uses all the finest bits of the Hawx family and adds an effective mix of stiff flex and high volume fit, making it a winning option for advanced and expert skiers with wider feet. Prolite construction delivers powerful performance by adding reinforcement in critical zones of the lower shell and upper cuff while keeping the boot agile. The shell is Memory Fit so can be heated and moulded to better suit the specifics of each skier’s feet. The liner is the class-leading 3D Mimic Gold which can be custom moulded too; Thinsulate adds warmth. Powershift on the spine increases the fine-tuning, allowing the forward lean and the flex to set-up perfectly for each skier’s needs.Ability LevelBoots13OverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots. ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1976 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£480
From Ellis Brigham
Salomon’s S/Pro Supra BOA 105 W challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new women's model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep. General InformationCategory: AlpineFlex: 105Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£480
From Ellis Brigham
Salomon’s S/Pro Supra BOA 105 W challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new women's model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep. General InformationCategory: AlpineFlex: 105Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
This exciting, brand new model is available right now, exclusively at ellis Brigham. The 2024 Nordica Unlimited 95 W DYN fuses the ski-ability of traditional alpine boots with the uphill capabilities of tour models. A Triax and PU shell offers a powerful yet lightweight feel, but with a smooth and more forgiving flex compared to the lighter, firmer plastics used in some more tour dedicated models. TriForce construction uses softer plastics to provide excellent wrap around the foot and stiffer plastics provide the power that good skiers need; a cable closure on the lower foot easily switches from tightened for downhill skiing to a loser touring feel with an easy flick of the toe clip. Boot to binding compatibility can be a bit of a minefield especially when it comes to tour/backcountry boots, but with the Unlimited Sole design it’s a fuss-free experience with full-length GripWalk soles that offer excellent traction and can be unscrewed should they ever need replacing. Infrared fit technology makes it easy to tweak the snug yet comfortable 99mm last for the perfect fit and a 3D Cork Fit Primaloft® Light liner boosts comfort and foot hold. Full of tech and easy to use features these boots are the ultimate choice for the adventurous skier looking for one boot that does it all.Ability LevelTour4OverviewFitMedium ankle and heel pocket, average instep height with a medium width forefoot and round toe shape.ShellInfrared PU shell and Triax cuff. PU provides a smooth flex and Triax is a light material that provides the necessary support without being over stiff, perfect for good skiers wanting to reduce their set-up weight. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit Primaloft® Light, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable. Primaloft offers exceelent warmth to weight ratio for keeping feet comfortable even when the temperatures drop. PVC free.Key FeaturesTri-Force ConstructionNordica’s Unlimited boots are shaped by both new ideas and the distillation of proven technologies. After all, sometimes the answers we seek begin with what we already know. For proof, look no further than the Tri Force Cuff found on the new Unlimited boots. Through the years, Nordica have leveraged theirr Tri Force Construction to create a range of boots tailored to the unique needs of today’s skiers. By strategically positioning three different densities of materials – a feat done by no one else in the game – Nordica’s Tri Force Cuff Construction boosts the fit and performance of a boot while minimizing weight. A softer front cuff panel wraps the shin to enhance fit and ensures a smooth flex when skiing and optimizes mobility when hiking. The cuff’s mid layer provides lateral support and helps boost energy transmission. Lastly, an exceptionally stiff spine supports the ski-walk mechanism to maximize power, control, and response. For the Unlimited boots, they developed a Tri Force Cuff that maximizes comfort and performance whether you’re skiing, skinning, or hiking. And needless to say, it also maximizes your fun.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Hike MechanismPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Wrapping BootsThe little things matter. And often, these little things ultimately aren’t so little. This is especially true for the buckles on the Unlimited boots. Guided by a commitment to enriching your adventures, Nordica reimagined how the buckles on these boots perform. And in doing this, they improved the fit, efficiency, and durability of the boots. Instead of classical bales, the Unlimited boots feature a streamlined wire closure system that cradles your foot to offer a precise fit that boosts comfort and control. When it’s time to hike, skin, or just loosen up your boots, you can simply undo the quick-release power strap and flip up the toe buckle to release the closure system, which loosens the lower shell for greater comfort and mobility. And to further reduce weight and provide a consistent and reliable fit, the remaining buckles on the boot use a special magnesium alloy. Buckle up–and never look back–with Nordica’s Unlimited boots.SoleTo be worthy of adventure, a touring boot must be capable of not just enduring but also excelling in the diverse terrain it will inevitably encounter. Guided by this belief, Nordica set out to develop an entirely new sole for our Unlimited boots – a sole that was as versatile as it was durable. It had to offer exceptional grip to ensure it could withstand hiking in the most treacherous terrain – be that a rocky summit, high-stakes glacial traverse, or a parking lot coated in ice. Yet it also had to interface perfectly with countless binding systems while maximizing safety and control. This led to the creation of a sole that provides the legendary traction and performance of the Michelin Gripwalk system while also featuring DYN inserts. This sole is compatible with both ISO Gripwalk and alpine touring standards. And thanks to its screw-on design, the sole can readily be replaced to maximize the longevity of the boot. No matter how you define adventure–or where you pursue it–you can depend on Nordica’s Unlimited soles. [Full Details]
£520
From Ellis Brigham
Salomon’s S/Pro Supra BOA 120 challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep.General InformationCategory: AlpineFlex: 120Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1880 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£520
From Ellis Brigham
Salomon’s S/Pro Supra BOA 120 challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep.General InformationCategory: AlpineFlex: 120Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1880 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. A Grilamid/Carbon Grilamid LFT construction utilises Web Frame Design to save crucial weight without losing power. The boot is filled with features to make switching from ski to tour mode simple without ever having to take your gloves off: Speed Lock Plus, Wave Closure System and Thor Buckles. The Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexiblity for volume over the top of the foot.Shell Carbon Grilamid LFT shell, Grilamid cuff, mouldable. The Carbon Grilamid Web Frame on the shell provides downhill power for responsive skiing, whilst remaining lightweight. The Grilamid Bi-Injection Overlap cuff promotes instant transmission. A Pebax Axial Alpine evo tongue blends overlap power and the ease of a cabrio style entry.LinerIntuition Cross Fit Pro Flex, mouldable. Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. A super warm and lightweight Thermoformable liner, for superior comfort for perfectly matching the foot. Developed with specific flex zone for maximum agility and more comfort advantages in uphill.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock Plus Ski/Walk mechanismFriction free and rock solid for powerful skiing and a 60o range of motion when in walk mode.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: noCustom Liner: yesPower Strap: CinchVolume: mediumClips: Sole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: yesRange Of Motion: 60Weight (g): 1450Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Copyright Interhike. All rights reserved.