Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£273
From Ellis Brigham
The RC4 The Curv One 105 will appeal to advanced skiers who are looking for a medium volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is further enhanced by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 105, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 105Last Width: 99 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1820 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370 - £560
Using many features of the top-end models in the range, the Hawx Prime XTD 100 HT is an excellent introduction in to the world of BC ski boots providing performance, comfort and excellent value. Prolite construction uses different thicknesses of shell wall to balance lightweight with power and control. The Free/Lock hike and ski system provides 54deg of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the 3D Silver Touring liner takes a mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles at the toes (not at the heel) so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver with Touring Flex Zone, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. A special construction in the rear of the liner allows it to flex backwards for a more comfortable range of motion when the walk mode is being used.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: Toe onlyHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1962 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£85
From Ellis Brigham
Salomon's S/Race 60 M takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm; 4 aluminium clips hold the foot neatly in place.Ability LevelBoots7OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1550Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
The Speedmachine J 3 is ideal for girls who want to progress in comfort and with confidence. The Triax plastic keeps the weight down without affecting performance and the Comfort Fit liner is both supportive and cosy. 3 aluminium buckles are perfectly placed to hold the foot in position without excess pressure or coming too high up the leg. The top clip has a macro-adjustment should more movement be required; a soft plastic insert over the instep allows for easy entry and exit. Best of all, is the Weight Adjuster, a simple mechanism to alter the flex depending on the skiers weight so the boot always has the right mix of support and precision.Ability LevelBoots7OverviewFitMedium volume with nice all over hold that has good heel grip and space at the toes.ShellTriax shell and cuff. Triax is a light material that provides the necessary support without being over stiff, perfect for lighter weight skiers.LinerComfort Fit. Nordica's Comfort Fit liners offer great out of the box fit and comfort; the plush liners adds an extra level of warmth and cosiness; the tongue can be customised with heat moulding.Key FeaturesWeight AdjusterNordica's junior 3 buckle boots are equipped with a Weight Adjuster. This is a simple system which allows the best flex to be chosen, depending on the skiers needs. Select I for skiers under 25kg, to keep the flex soft and easy; II for skiers 25-45kg for a medium flex that combines support and forgiveness; III for skiers over 45kg who need a stiffer setting and more support. easy entrySoft plastic over the instep allows for an easy entry and exit when taking the boot on or off.General InformationCategory: AlpineFlex: 45Last Width: n/aCustom Shell: NoCustom Liner: YesPower Strap: n/aVolume: MediumClips: 3 x aluminium Sole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 860 (1/2 pair size 21.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£100
From Ellis Brigham
The Speedmachine J 4 will help girls progress in comfort and with confidence. The Triax plastic keeps the weight down without affecting performance and the Comfort Fit liner is both supportive and cosy. 4 micro-adjustable buckles ensure the right amount of pressure to hold the foot in place without excess pressure; the 25mm powerstrap is simple to use and improves leg retention, boosting control and comfort.Ability LevelBoots8OverviewFitMedium volume with nice all over hold that has good heel grip and space at the toes.ShellTriax shell and cuff. Triax is a light material that provides the necessary support without being over stiff, perfect for lighter weight skiers.LinerComfort Fit. Nordica's Comfort Fit liners offer great out of the box fit and comfort; the plush liners adds an extra level of warmth and cosiness; the tongue can be customised with heat moulding.Key Featureseasy entrySoft plastic over the instep allows for an easy entry and exit when taking the boot on or off.General InformationCategory: AlpineFlex: 55Last Width: 100Custom Shell: NoCustom Liner: YesPower Strap: Velcro 25mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1400 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£110
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£150
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£150
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£170
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16 degree forward lean and a 4 degree ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£170
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16 degree forward lean and a 4 degree ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Cochise 95 W is ideal for skiers who spend the majority of their time skiing from lifts but who are also considering trying different terrain and conditions. The lightweight shell and 42o range of motion make short skins and hikes more comfortable. There’s no loss in performance thanks to the Power Light design with its stiffer and thinner frame material. C.A.S. on the shell and liner enable our boot fitters to make simple and effective alterations to the fit, even after the liner has been heat moulded. [Full Details]
£180
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£200
From Ellis Brigham
The relaunched Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime. [Full Details]
The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the 3D Silver Liner is customised too, adding an extra level of comfort.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold W Thinsulate, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1671 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£210
From Ellis Brigham
Dalbello’s Panterra 100 is a great all mountain choice for intermediate and lighter advanced skiers. The hike mode provides 50o of articulation for ascending or just getting around town; GripWalk soles improve walking. The Power Cage saves weight over previous models without dropping any performance; Cabrio design ensures a smooth flex and consistent contact with the tongue and shin, as well as easy entry and exit. Personalisation comes via the custom fitting of the MyFit shell, IF Performer liner plus the twin canting and variable ramp angle. Alpine soles are provided in the box.Ability LevelOverviewFitA medium to high volume fit all over, cabrio construction gives some flexiblity for height over the instep. Shell Irfran shell and cuff with PU tongue, mouldable. Dalbello's unique Cabrio construction combines a boot shell/boot cuff assembly with an external Kinetic Response Tongue closure which enables a progressive power transmission and great shock absorption. Furthermore, a smooth flex and a dynamic rebound are characteristic of the Cabrio Construction. This design also allows for an effective Hike & Ride feature, as the burly cuff lock mechanism frees the upper cuff from the lower shell a long range of motion for functional hiking and climbing is guaranteed. The Powercage design and milled outer shell result in optimum power distribution across the entire boot and reduce the weight without compromising on stabilityLinerIF Performer Liner, mouldable. IF means Instant Fit and stands exactly for this - instant fit at the very first step in. 60% of this high-performance fitting liner can be thermo formed in four minutes only. The special 8mm medium density of Ultralon foam cushions the foot as great as it supports the power transmission. Pe upper provides support and the neoprene toe box improves comfort.Key FeaturesGripWalk SolesWalking in ski boots always was difficult and somehow dangerous. GripWalk is the revolutionary sole-binding innovation that provides much better walking comfort and improved grip. GripWalk soles with rocker profile are completely covered with a high friction material for better grip on any surface. Integrated anti friction bars enable a very direct and effective power transmission to the binding.Dynalink Heel Retention SystemThe Dynalink heel retention is an independently functioning heel / instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively.Low Cuff Hinge PointThe Panterra uses a high leverage cuff assembly with hinge points mounted lower than standard construction boot designs. The Low Hinging Cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.Variable Volume Fit Shell Fitexclusive to Dalbello. Developed to permit skiers to regulate overall boot width from a range of 102 to 100 mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles.Inverted Forefoot BuckleThe forefoot closure buckle is inverted to close on top of the boot shell, not on the side. The top closure positioning prevents buckle breakage and bending.Variable Ramp AngleAdding the variable ramp angle Shim under the footboard changes the ramp angle from 3 to 4 degrees. This gives the skier the ability to find the optimum ramp angle for balance and performance.SpecificationCategory: AlpineFlex: 100Last Width: 100-102Custom Shell: YesCustom Liner: YesPower Strap: 40mmVolume: Medium-HighClips: n/aSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1920Binding Compatibility: Alpine, Grip Walk, Multi Norm [Full Details]
£210
From Ellis Brigham
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£210
From Ellis Brigham
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£215
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£215
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£231
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Gold liner adds precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier’s foot is placed inside the complete boot whilst it cools. With the foot’s natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold W Thinsulate, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier’s feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: 40mmVolume: MediumClips: n/aSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1625Binding Compatibility: Alpine, Grip Walk, Walk To Ride, Multi Norm [Full Details]
£238
From Ellis Brigham
This Speedmachine 95 W offers the ideal blend of performance and comfort for intermediate to advanced female skiers. Tri Force Construction and a pre-formed 3D Performance Fit liner give the right amount of hold for responsive skiing. An Infrared Technology shell means pressure points can be specifically targeted to create the most complimentary shape for maximum comfort. Using a softer plastic over the instep takes the struggle out of getting in and out of the boots and a PrimaLoft liner will help keep feet toasty for longer.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1780 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£241.5
From Ellis Brigham
The RC4 The Curv One 110 will appeal to good intermediate and advanced skiers who are looking for a higher volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is enhanced further by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: making it thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 110, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 110Last Width: 101 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1980 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£245
From Ellis Brigham
The Magna 105 W successfully fills a difficult position in our range: a stiffer boot with extra internal space. Good skiers with high volume feet will appreciate that there is no sacrifice of comfort or performance whilst still providing space. It has a high level of customisation from both the 3D Silver liner and mouldable Memory Fit shell. The shell is easily adapted during the fitting process to give up to 6mm of additional space, the liner fitting adds extra comfort. Customisation doesn't stop with the fit, Powershift means the flex and forward lean can be adjusted too.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 105Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1988 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
Salomon raised the bar with the S/MAX 100: lighter, stronger, with increased sensitivity and even more effective customisation compared to previous models and the competition. The Coreframe construction positions a stiff internal frame close to foot for power and direct energy transmission. A softer Custom Shell HD material wraps the foot and is moulded and customised in-store. A complete process taking just 10 minutes. The seamless Custom Fit 3D Sport liner adds extra personalisation as well as warmth. A big hit with good skiers wanting a slimmer fit.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Perf, customisable. New anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1780 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£273
From Ellis Brigham
The RC4 The Curv One 105 will appeal to advanced skiers who are looking for a medium volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is further enhanced by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 105, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 105Last Width: 99 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1820 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£273
From Ellis Brigham
The RC4 The Curv One 105 will appeal to advanced skiers who are looking for a medium volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is further enhanced by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 105, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 105Last Width: 99 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1820 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon’s option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: 45mmVolume: Medium-HighClips: n/aSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1750Binding Compatibility: Alpine, Grip Walk, Walk To Ride, Multi Norm [Full Details]
£280
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£280
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£301
From Ellis Brigham
The RC4 The Curv One 120 from Fischer will suit advanced level skiers looking for an impressively customisable, higher-volume fit. It has plenty of space internally, without ever becoming overly large; the Vacuum process of custom fitting really improves the feel, removing any pressure spots. The pre-formed 3D liner enhances this further with the heat moulding ensuring a fully customised approach. Somatec puts the skier in a relaxed stance, the chunky 45mm powerstrap boosts the level of control; GripWalk soles boost comfort and safety.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 120, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 120Last Width: 101 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1980 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The Strider 130 allows you to fully explore the mountain whether using lifts or hiking for extra vert. Tri-Fit Customisation uses an infra-red ready shell that can be easily expanded, screw-in components for simple changes and a 3D Custom Cork mouldable liner with PrimaLoft for warmth and durability. The exceptional fit and comfort is matched by the performance: 46° range of motion aids ascents, the lightweight cuff and Tri Force construction ensure power without excess weight and Michelin Grip Walk soles improve traction.Ability LevelOverviewFitA snug fit on the rear foot with generous forefoot width and a medium to high instep.Shell Carbon Triax cuff, Infrared PU clog, mouldable. Lightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort. Infrared technology uses an infrared lamp and a vacuum system for precise and safe customisation where extra work is needed on a shell.Liner3D Cork Fit Primaloft Light, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesWeather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Feather Lock Hike/Ski MechanismThe Feather Lock system creates a 46o range of motion yet when locked-out in ski mode, its spine delivers unprecedented power and precision for the ride down.Michelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: BackcountryFlex: 130Last Width: 100Custom Shell: noCustom Liner: yesPower Strap: Velcro 45mmVolume: mediumClips: Sole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: yesRange Of Motion: 46Weight (g): 1910Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320 - £470
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Copyright Interhike. All rights reserved.