Marker Duke PT 12 100mm Ski Bindings 2022

Marker Duke PT 12 100mm Ski Bindings 2022
£510

Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red

Buy From


More from Ellis Brigham

Alternative Shops

Image (Click to enlarge)	Product	Price	Buy from...
	Marker Duke PT 12 100mm Ski Bindings 2022 [more info...][less...]	£510	More from Ellis Brigham
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red [Full Details]

Prices and availability are correct at the time of publishing, but advertisers may change the details before we have time to update them.

Marker Duke PT 12 100mm Ski Bindings 2022 Reviews

Submit your own review

Rating

Review

Register new user

Email Address:

Verify Email Address:

Password:

Verify Password:

Nickname:

Or Login

Email Address:

Password: Forgotten Password

Submit Review